10
TROUBLESHOOTING PROCEDURES (CONT’D)
Symptom
Problem
Solution
Not Spraying
Loose needle chucking nut
• Finger tighten (#16)
Needle stuck
• Pull out/Break-free Needle (#4)
Improper air pressure
• See specific compressor instructions
to raise or lower the air pressure
Paint too thick
• See Paint Preparation
Clogged nozzle
• Clean nozzle (#3) with toothpick
Cracked or damaged nozzle
• Replace nozzle (#3)
Skipping
Dried paint on needle tip (Tip-Dry)
• See Cleaning the Needle
Paint too thick
• See Paint Preparation
Dirty airbrush
• See Cleaning the Airbrush Between Colors
• See Cleaning the Needle
Cracked or damaged nozzle
• Replace nozzle (#3)
*Warning: The most likely time to damage the nozzle (#3) is upon removal from the airbrush.
