19
FM operation
Press the FUNCTION button repeatedly to select FM mode. The display will show FM and
the frequency.
auto scan
To search for an FM station, press the PLAY/PAUSE/SCAN button to start the auto scan
forward or press and hold the PLAY/PAUSE/SCAN button to start the auto scan reverse.
Once a station has been found, the scanning will stop automatically.
manual scan
To search for FM stations manually, press the SKIP/TUNE SEARCH
buttons
repeatedly until your desired frequency is reached.
With FM radio it may be necessary to fine tune each station by pressing the
SKIP/TUNE SEARCH
buttons repeatedly. Each press will adjust the
frequency by 0.05MHz. If reception is still poor adjust the position of the aerial
or try moving the radio to another location.
audio mode
Press the SELECT/FM MO./ST. button to toggle between the Auto or Mono selection.
The unit will automatically switch between stereo and mono in auto mode, but
you can override this and switch this function manually. This is helpful when
receiving poor signal reception.
storing stations
You can store up to 20 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold the PRESET/MEMORY button. The preset number will flash.
2. Press the PRESET/ARROW buttons to select your desired preset station number
and then press the PRESET/MEMORY button to confirm.
3. The station will be stored and the screen will then show “Preset # Stored“.
iDABHF12_IB_RC_120928_Annie.indd 19
28/09/2012 5:20 PM