IWAKI TC-X400A M Series, Operation Manual

Page: 6 / 32

For safety
CAUTION
・ If a diaphragm of this product is damaged, the supplied air may mix with the fluid or the fluid may flow into the main body (air-
switching portion). If the air supply is inadequate or the pump is contaminated, do NOT operate the pump.
・ After you shut down the pump and disconnect the piping, some fluid may still be remaining inside the pump. Also, if the pump
is left unused for a prolonged period, some fluid may remain inside the pump and within the connected piping. Therefore, be
sure to purge the system of fluid and clean the pump before prolonged disuse or storage. If the product is left unused for a
prolonged period with fluid remaining in the connected piping as well as the pump itself, the fluid may expand, depending on the
ambient temperature (because of freezing or heat), which may cause damage to the pump and/or piping and possible leakage
of fluid.
・ The Pumps Non wetted parts are made from various materials and are not designed to withstand corrosive chemicals.
Therefore there is a possibility of damage to the pumps non wetted parts through leaks or breakage of the diaphragm as
well as liquid or gas permeation through the actual diaphragm material. There is also a possibility of damage due to chemical
fumes in the local environment or fumes entering into the air line through the compressor. It is also possible to damage
these components when incorrect lubrication is used. To help prevent any unnecessary damage please follow the following
precautions. Ventilation of the local environment, remove liquids when the pump is not in use. (Long term). Open ventilation of
the switching area of pump. Clean and flush the pumps air switching section if a leak or diaphragm breakage occurs.
• For safe transport be sure to prevent liquid leaking from pump for safe transport.
It is the end-users responsibility to thoroughly wash and clean the pump(s) to prevent accidents caused by liquid leaks.
!
!
!
• Always use genuine parts when replacing component parts of this product. Do not attempt to modify the components parts or
replace them with anything other than genuine parts.
!
- 5 -