IWAKI TC-X400A M Series, Operation Manual

Page: 5 / 32

For safety
WARNING
• When using this product, observe local relevant regulatory rules concerning transfer and storage of chemicals, fire prevention,
labor safety standards, etc.
• Hazardous fluids (such as strong acid or alkali, flammable or toxic liquids) or gas bubbles generated by such fluids may cause
serious injury or even death if accidentally inhaled or consumed or if they come into contact with the eyes or adhere to the
skin. Therefore, the following precautions are strongly advised.
*Be fully familiar with the properties of the fluid to be pumped and work in strict accordance with the operating instructions
provided by the suppliers of such fluids (such as wearing goggles, gloves, mask or protective work clothes).
*When storing a hazardous fluid, strictly comply with the regulatory procedures (such as using proper containers, storage
conditions, etc.).
*Install the piping and exhaust port of this pump away from areas frequented by human and animal traffic if there is a risk that
transferring liquids may affect the human body.
!
!
!
- 4 -
• Before using this product, be sure you are familiar with the precautions regarding the fluid to be pumped, and verify the
corrosion resistance of the parts that will come into contact with the fluid (wetted parts). NEVER use the product with any
fluid against which it does not have sufficient corrosion resistance or with a fluid that poses a risk of explosion. If you are
unsure of the corrosion resistance, contact your nearest distributor or our company directly. If you use this product with any
fluid against which the parts that will come in contact with the fluid do not have sufficient corrosion resistance, it may result in
damaging the product or leakage of fluid or pump failure.
• In case of transferring a high temperature fluid, casing and piping heated and may cause burns by touching.
!