[4] Push a flat-head screwdriver into the engagement
between the split plate (337) and the front casing
(100.1) to open the jointed section. In this step, be
careful not to damage the seal surface and gasket
(400.1).
[5] Remove the impeller (230) from the split plate and
magnet capsule unit (858) by rotating it
counterclockwise.
* Keep in mind the power of the magnet. Also, be
careful not to damage the front casing, split plate, rear
casing, bearing sleeve, thrust bearing impeller, etc.
This part is fixed tyghtly with adhesive. If
necessary, use belt wrench for loosening impeller
from spindle.
[6] Pull the rear casing (158) and rear casing cover (159)
out of the bracket.
- 38 -
