19
Sp
eci
fic
ation
Specification/Outer dimension
Specification/Outer dimension
Specification
Information in this section is subject to change without notice.
■ Pump
Item
Spec
Max discharge capacity
5.0 [ml/shot]
Max discharge pressure*
4&6
150 [kPa]
Pressure resistance
300 [kPa]
Discharge speed
0.1-4.0 [ml/sec]
Suction speed*
1
0.1-3.0 [ml/sec]
Resolution
0.01 [ml]
Discharge accuracy
±0.3 [%]F.S
Linearity*
5
±0.5 [%]F.S
Allowable liquid viscosity
Max.100 [mPa·s]
Allowable surface temperature*
2
Max.30 [ºC]
Number of pulses per discharge capacity*
3
2400 [pulse/ml]
Ambient temperature
10-40 [ºC]
Ambient humidity
30-45 [%RH]
Allowable liquid temperature
15-25 [ºC]
Weight
3 [kg]
*1
Suction pressure may be too low (negative) and trigger cavitation depending on operating conditions such as liquid
viscosity, piping layouts and suction speed (max. 3ml/sec). Adjust the suction speed as necessary.
*2
The allowable surface temperature is based on operation at ambient of 22±1ºC, with full stroke length and 1 shot/min.
*3 The number of pulses per discharge capacity is a reference value.
*4
Set the discharge speed not to exceed the max discharge pressure.
*5
When handling viscous liquid, linearity may reduce depending on piping layout. In this case linearity can be maintained
by closing a discharge-side air operated valve after the discharge action of the pump. Determine a delay time in accord-
ance with operating conditions.
*6
Do not close a valve on a suction line or a discharge line during operation. It may pose a leak or blow out the pump or a
pipe.
