- 2 -
Safety instructions
●
Turn off power
Working on the pump while the power is ON, you may be shocked. Be sure
to turn off the pump and related devices before any work.
●
Terminate operation
Finding any abnormal condition, stop the operation immediately and
inspect/solve problems.
●
For specified application only
The use of the pump in any application other than those clearly specified
may result in injury or damage. Use the pump in a specified condition.
●
No modification
Do not modify the pump. We are not responsible for any accidents or dam-
age due to modification.
●
Wear protective clothing
Always wear protective clothing such as safety goggles, protective gloves
when arranging piping or dismantling the pump.
●
Do not place the pump close to water
The pump is not water-proof construction. The use of the pump in a humid
place or a place where the pump can bet wet, electrical shock or short-cir-
cuit may result.
CAUTION
WARNING
●
Restriction on pump operator
The pump should be handled by a qualified person with a full understand-
ing of the pump.
●
Specified power only
Do not apply any power other than the specified one on the nameplate.
Otherwise damage or fire may result.
●
Do not run pump dry
Do not run pump dry. Parts friction heat is generated and damages the
pump if the pump runs without liquid.
●
Do not wet the pump
If a liquid spills over electric parts or wires, a fire or electrical shock may be
caused. Install the pump in a place free from liquid spillage.
Electrical Shock
Prohibited
No Remodeling
Wear protective
gear
Prohibited
Prohibited
Prohibited
Prohibited
Do not wet
or dampen
