-
41
-
(11) Push EXT key to operate the pump.
Pump starts to operate, WAIT goes out and ON lamp
blinks when a pulse comes.
The pump automatically stops after it operated for the
stroke number which is set at above item (8). During the
operation, the display shows pre-set stroke number and
EXT lights. Push START/STOP key to stop the pump
and go to WAIT mode. To start the pump again, push
EXT key.
Alarm indication
If next pulse comes during the multiplying operation,
OVER lights. If the pulse memory is set to ON, max. 255
times pulse is put in memory and the pump continues
operation.
3. Pulse dividing operation
(1) Power ON
Power on and green lamp lights, display shows “V3.0E”
and then shows stroke rate of manual operation and goes
to WAIT mode.
(In case the pump is powered for the first time)
The word WAIT is lit at WAIT mode. If it does not show
WAIT, push START/STOP key once to change to WAIT
mode.
(2) Move to EXT operation mode.
Push
▲
key and EXT key simultaneously.
The word dIG is displayed and SET lights.
(If the word ANA is displayed, push
▼
key to change to
dIG. Every time you push
▼
key, the words ANA and
dIG switch over.) When the pump is shipped from the
factory, it is set at dIG.
EXT
START/STOP
EH-E
ON
STOP OVER
WAIT
X 5
1
2
SET
EXT
Blink
EXT
START/STOP
EH-E
ON
STOP
WAIT
X 5
1
2
SET
EXT
OVER
EXT
START/STOP
EH-E
ON
EXT STOP OVER SET
1
2
WAIT
360
EXT
START/STOP
EH-E
ON
EXT STOP OVER
WAIT
1
2
I G
SET
