![background image](http://html1.mh-extra.com/html/ivt/hmc300/hmc300_operating-instructions-manual_2097743031.webp)
31
Get information on the system
HMC300 – 6 720 813 192 (2014/10)
Menu:
Heating/Cooling
This menu only shows menu options for installed heating
circuits.
Menu:
DHW
This menu is only shown if a hot water system is installed.
Menu:
Pool
This menu is only available if a heated pool is installed.
Menu:
Operating data
Apart from the first menu option, only the menu options for
installed units are shown in this menu. If two heat pumps are
working in combination all the menu options are shown
separately for each heat pump after the control system's
operating hours.
Menu options
Description
Operating mode
heating/cooling
Actual operating mode for selected
heating ciruict (
Heating
,
Idling
,
Cooling
)
Set room temp.
Actual setting of room temperature for
selected heating circuit:
•
May change several times a day in
automatic mode
•
Constant setting in optimised
mode
Actual room temp.
Actual measured room temperature in
selected heating circuit
Actual flow temp.
Actual measured flow temperature in
selected heating circuit
Table 29 Information on house heating
Menu options
Description
Set temp.
Required hot water temperature
Actual temp.
Actual measured hot water
temperature
Table 30 Information on hot water
Menu options
Description
Pool set point
temp.
Required water temperature in pool
Actual temp. pool
Measured temperature in pool
Table 31 Information on heated pool
Menu options
Description
Operating hours
Control
Control unit operating hours since
commissioning of the heat pump or
since last reset.
Output additional
heat
Output of additional electric heat after
commissioning or since last reset.
Operating hours
compressor
heating
The compressor operating hours in
heating mode since commissioning or
since last reset.
Operating hours
compressor
cooling
The compressor operating hours in
cooling mode since commissioning or
since last reset.
Operating hours
compressor HW
The compressor operating hours in hot
water mode since commissioning or
since last reset.
Operating hours
compressor pool
The compressor operating hours in
pool mode since commissioning or
since last reset.
Number of starts
heating
The number of compressor starts in
heating mode since commissioning or
since last reset.
Number of starts
cooling
The number of compressor starts in
cooling mode since commissioning or
since last reset.
Number of starts
HW
The number of compressor starts in
hot water mode since commissioning
or since last reset.
Number of starts
pool
The number of compressor starts in
pool mode since commissioning or
since last reset.
Table 32 Information on operation of heat pump
Summary of Contents for HMC300
Page 1: ...Operating Instructions HMC300 6 720 808 471 00 1O EMS plus Control unit 6 720 813 192 2014 10...
Page 42: ......
Page 43: ......