12
Manual instruction
EN
Maintenance and storage
Before carrying out any maintenance
operation, turn off the electric power
supply by disconnecting the plug from
the extension cable.
Always keep the tool and the ventilation slots (if
•
present) cleaned. Regular cleaning and maintenance
of the appliance will ensure efficiency and prolong
the life of your tool.
If the tool should fail despite the rigorous
•
manufacturing and testing procedures, the repair
should be carried out by an authorized IVT customer
service.
Keep all nuts, bolts, and screws tight, to be sure
•
the tool is in safe working condition.
Replace worn or damaged parts for safety.
•
Use only original spare parts. Parts not produced by
•
manufacturer may cause poor fit and possible injury.
Store the tool in a dry room out of reach of kids
•
and away from any flammable material.
Never wet the device or spray water on it!
•
After a prolonged period of not using
the fan heater, it is necessary to start the
fan heater at ventilation only and to
simply let it ventilate air without heating
for a period of 2 or 3 minutes.
Environmental protection
Recycle raw materials instead of
disposing as waste.
Machine, accessories and packaging should be
sorted for environment-friendly recycling.
The plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
Troubleshooting
Conventional Trouble
Trouble reason
Clearing way
The fan heater fails to
switch on, the switch
light fails to illuminate
Lack of power supply
•
Lack of power supply
•
Power switch is malfunctioning
•
Check that there is power supply
•
If there is power supply, check the
•
power cable: replace if it is damaged
Check the power switch and replace it
•
if damaged
The fan heater functions
but the light fails to
illuminate
Lack of power supply to the motor
•
wiring
Motor is malfunction
•
Check the motor wiring
•
Replace the motor
•
The fan ventilates air but
fails to heat it, the switch
light does not indicate
that the fan heater is on
Lack of power supply to the heater
•
Heater is malfunctioning
•
Check the wiring to the heater
•
Replace heater
•
The fan heater fails to
heat air yet the switch
light indicates that the
fan heater is on
Overheating of the fan heater
•
On/off switch is malfunctioning
•
Switch off the machine an let it cool
•
down for 2 hours
Ensure that the on/off switch is
•
functioning
