6
•
3 performance levels (30 %, 70 %, 100 %)
•
Powerful Li-ion battery 7.4 V/2,200 mAh
•
Charge status display
•
Swivel lamp head
•
Flashing mode
•
Emergency light function
•
Incl. yellow diffusing plate
ROTARY SWITCH AND BATTERY STATUS INDICATOR
1.
Battery status indicator
2.
Flashing mode
3.
Power level 3
(100 %)
4.
Power level 2
(70 %)
5.
Power level 1
(30 %)
6.
Off
1
2
3
1.
Battery is empty if LED 1 flashes red
2.
LEDs 2
(red, yellow, green)
are on when charging is
completed.
3.
The green LED 3 lights permanently when the
rechargeable battery is full.
EMERGENCY LIGHT FUNCTION
In case of power failure, the work lamp switches on automatically, if it is connected to the mains and switched on. If voltage
is re-applied, the work lamp switches off automatically. To use this function follow below steps:
1.
Connect charging adaptor with charging base and 230 V power supply
2.
Switch on the work lamp in the desired lighting mode
3.
Place the switched on work lamp in the charging base – the lamp switches off
Simulation of the
Disconnect the charging adaptor from the 230 V power socket.
emergency light function
The work lamp switches on automatically.
ELECTRONIC DEEP DISCHARGE PROTECTION
This work lamp is equipped with an electronic deep discharge protection in order to protect the rechargeable battery.
This prolongs the lifetime of the rechargeable battery and protects the environment.
CHARGING THE BATTERY
This work lamp is equipped with a high quality 2,200 mAh Li-ion battery. It can be charged by the 230 V power supply.
Alternatively, you can also charge the lamp with the 12 V DC connector in a vehicle. The matching charging adapter is also
included in the delivery.
Charging by wall charging base:
1. Connect the charging adaptor with the charging base.
2. Connect the charging adaptor with the right supply voltage source
(230 V AC or 12 V DC).
3. Place the lamp in the charging base.
Using the charging socket on the lamp:
1. Connect the charging adaptor with the charging socket of the lamp.
2. Connect the charging adaptor with the right supply voltage source
(230 V AC or 12 V DC).
