74
6. Practical Use
6.2 Firing with an individual program
Step 1:
Switching on
Switch on the furnace with the mains switch at the rear of the furnace.
The furnace conducts an automatic self-test.
Wait until the furnace has reached the set stand-by temperature.
Step 2:
Select the program
After the self-test, the display shows the home screen. Press the
[Individual programs]
button.
Step 3:
Entering the parameters
Enter the individual parameters and create the desired firing program
(See Chapter 5.2.3 for details).
Select the desired program group
Select the desired program
Summary of Contents for Programat CS3
