iVina BulletScan M40, User Manual, Page: 10 / 29

3-2
3.1 Initial setup
1. Connect the plug on the power adapter cable to the power connector on
the scanner.
2. Plug the power adapter into a power outlet. Wait until the indicator light
on the scanner stops blinking and stays on steady, indicating the scanner
is ready.
3. Insert a memory card into the memory card slot or a USB flash drive into
the USB Port. (If you connect a memory card and a USB flash drive to the
product at the same time, the scanned image will be stored in the
memory card.)
Connect a USB flash drive into the USB Port.
Insert a memory card into the memory card slot.