10
Operating the Device
Put the plug into the grounded socket. Your device will turn on. When the device is
on, you will see the stand-by light on the Dashboard. Stand-by light indicates that the
device receives electricity.
In order to operate the device, you should press the POWER button on the remote
control, or on/off button on the device. When you press POWER button and on/off
button, the device will start to operate at the 1st level, and 1st level light will light up
on the Dashboard.
Warning:
If the remote controller is lost, in the first 30 sn, the device may be activated by pressing
down on the surface of the warmer approximately 5, 6 times once a second, (by standing next to
the appliance and pressing the center of the top surface with the toes, for example). The appliance
cannot be switched off without the remote controller; It turns off automatically after its operating
period (1 hour) is over, or needs to be unplugged.
Reducing and Increasing the Temperature
When you want to increase or reduce the temperature, you can select the level you
want by pressing the related button ((+) to increase, (-) to reduce) on the remote
control.
When you want to operate the device at maximum power, you can use the Continuous
Operating at Maximum Power (Turbo Timer) button on the Remote Control, or move to
the 2nd level. Presence-detecting system is disabled for 4 hours following the pressing
of Turbo Timer button.
Temperature Reducing Button (-)
Power Button
Temperature Increasing Button (+)
Operating at Maximum Power
(8 hours) (Turbo Timer)
