15
EN
Manual Electric Heater With Fan
Şekil 12. Thermostat and Adjustment Switch
OFF
FAN, VENTILATOR
FIRST SETTING
SECOND SETTING
SIGNAL LAMP
Switching on the Unit
When you bring the turn switch on the Control Panel from position “0” to “F”, the
fan will start to operate and the signal lamp will light up. In the “F” position, the
fan is on but the resistor is not, so this can be used for circulating the air in the
environment without heating it.
Increasing and Decreasing Temperature
If you bring the device to position “1” using the turn switch, the heater will operate
at half power. The heater will operate at full power when you bring it to position
“2”. In the positions “F ”, “1” and “2”, the signal lamp will be on to indicate that the
device is operating.
Switching off the Device
When you bring the turn switch on the Control Panel to position “0”, the fan,
resistor and signal lamp will go off.
3. OPERATING INSTRUCTIONS