iVigil IP3H00, User Manual

Page: 5 / 66

- 5 -
Physical Description
Inside Overlook
Focus Adjustment
Adjust for focal length, and take a clear image.
Zoom Adjustment
Zoom image size, and adjust the width of the image.
Light Sensor
Detect incoming light sensor. While the incoming light is too low, image will display in
monochrome automatically.
NTSC/ PAL Switch
When the button is pressed, the camera switched to the NTSC video output;
on the contrary, the camera switched to PAL video output.
Micro SD
Support Micro SD card, the maximal capacity could be up to 32 GB. Device doesn’t support
Micro SD hot swapping, please reboot system after insert or remove Micro SD card.
DC Level Adjustment
DC Level adjustment knob is used to adjust the aperture size of the level; to
＋
(clockwise)
direction to adjust the aperture becomes large, to — (counterclockwise) direction to adjust
the aperture becomes small. The adjustment needs 2-3 seconds to take effective, so please
wait for aperture stable until next adjustment.
RESET
When system is frozen, please press the reset button and keep it depressed for 5 seconds,
after the power light is blinking, then release the reset button, the system will finish
rebooting procedure in one minute. When the power light is on; the device is booted up
successfully.
Power Lighting
When power lighting on means device boots up successfully; power lighting off means there
is no power input. When power lighting blinking means device operation system is being
loaded or hardware resets.