iVigil IP3H00, User Manual

Page: 46 / 66

- 46 -
Appendix A – Upgrade Firmware at Local Device
Upgrade newer version firmware to the device, there is another method that you can do at local
device besides the firmware upgrade on website. During the processing, you can tell the status by
lighting. The procedures to upgrade as following:
(1) Turn off the device power supply.
(2) Copy the upgraded firmware file from personal PC to compatible Micro SD
memory card.
(3) Confirm the firmware file which was copied to Micro SD card is as following file:
Firmware file
→
*.img and upgrade.sh
File name has to be exactly the same as above to upgrade system.
(4) Put the Micro SD card with firmware file to device.
(5) Turn on the device power supply.
System automatically upgrade; it takes 2~3 minutes for system upgrade. During the
process, power lighting continues blinking. After system reboot complete, the power
lighting stays on.
(6) Remove the Micro SD card on device.
Please remove Micro SD card while loading system has completed.
Please make sure the step 6 has been executed, otherwise, the system will upgrade again
while system reboot next time.