two buttons to add multiple load weights and to reset system to 0 when complete and or print.
Black Button
to be pressed to accumulate / add loads. LED display must show a current load weight in
order to add the load weight to a series of series in the accumulative load weight total counter.
Red button
to be pressed to reset current or accumulative total load weight and print ticket.
System utilizing onboard Bluetooth printer will provide printing tickets, individual and total load weights.
Note1:
This load weight will be shown on LED display until next time the forks are lowered to ground.
Note2:
When vehicle in motion the LED might show some random load weight. This is due to the hydraulic spikes
and this does not represents any actual load weight value.
Note 3:
During the normal operation if you do not want to use the weighing function, turn o
ff
the main power
switch located on the top of the housing. LED display will not show anything and you can operate your
electric pallet truck without weighing cycle function and lift cylinder will not stop during normal operation.
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
ADD LOAD BUTTON
ON / OFF Power Switch
ACCUMULATIVE TOTAL
RESET and PRINT BUTTON
