Calibration of loaded forks being lifted just above the ground
Pick up a known load weight and lower the the loaded forks to the ground.
- In our example we will use a known calibration load weight of 4000 pounds
* Button
M
is used to enter into weighing calibration procedure and shift to the next digit.
* Button
Arrow Up
is used to input digital value 0 to 9, wrap around.
*
Start entering a known load weight value for each digit by using arrow up button (increments
from 0 to 9 for each digit), wrap around. To move to next digit press “M” button.
- Start with least significant digit. (In our case this is
“0”
)
- Use
“M”
button to increment to the next digit on LED display.
- To enter the second digit, press the
“M”
button and Mode digit will increment to the second.
- Keep pressing
“M”
button and enter a third, forth and fifth values.
- As the input for known load value has only four digits (4000 in our example), the fifth digits
must be
“0”
.
Mode
Digit 5
Digit 4
Digit 3
Digit 2
Digit 1
1
0
2
0
3
0
4
4
5
0
Integrated Visual Data Technology Inc., 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
