2. Insert the exhaust hose into the window slider adaptor and
unit adapter. Then clamp together with the elastic buckles
of the adapter.
4. Adjust the size of the window slider according to the size of the
window. If the length of the window requires two window sliders,
use the bolt to fasten the window sliders, after adjusting to the
proper
length.
Hung window installation
3. Insert the exhaust hose into the air outlet vent as
seen
below.
4
Unit adaptor
Window slider
adaptor
Exhaust hose
Exhaust hose
assembly
Window slider A
Window slider B
Bolt
Foam seal B (Adhesive type-shorter)
Foam seal A
(Adhesive type)
1. Cut the adhesive foam seals A and
B to the appropriate length, depending
on the size of the window. Attach
them to the window sash and frame
as
shown.
4. Install the security bracket with 2
screws as shown (optional).
5. Insert the window slider adapter
into the hole of the window slider.
2. Insert the window slider into the
window
opening.
3. Cut the non-adhesive foam seal C
to match the width of the window.
Then insert the seal between the
glass and the window frame.
Window
slider A
Window
slider B
(if required)
Foam seal C
(Non-adhesive type)
2 Screws
Security Bracket
Sliding window installation
1. Cut the adhesive foam seals A and
B to the proper lengths. Then attach
them to the window sash and frame
as
shown.
2. Insert the window slider into the
window
opening.
3. Cut the non-adhesive foam seal C
to match the window height. Then
insert the foam seal between the
glass and the window frame.
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Window slider A
Window slider B
(if required)
Foam seal C
(Non-adhesive type)