20
4. - Settings
Caution
This does not under any circumstances
replace the safety facilities to be provided
by the customer!
The menu is closed by pressing “esc” or selecting “Exit
settings”.
The necessary basic settings required for the control
function are made in menu “4. Settings”.
There is a brief description of each adjustable para-
meter shown in the Display. Further the setting ran-
ge and in brackets the default setting is displayed.
4.1. - Tset
Setpoint at VFS sensor
The controller SFWC attempts to reach and maintain a constant temperature in the circulation
by controlling the speed of the hot water pump.
Danger
Temperature values which are set too high can lead to scalding or damage to the
system. Scalding protection must be provided by the customer!
4.2. - Tmax
Maximum tap water temperature at VFS
Maximum allowable temperature at VFS. If Tmax is exceeded, the pump is switched off. If the
temperature drops below Tmax the pump is switched on again.
Settings
4.3. - VFS -Type
Set the type of Vortex Flow Sensors
In this menu the type of Vortex Flow Sensor can be set.
