manualshive.com logo in svg

IV Produkt Envistar Compact, Operation And Maintenance

Share
Download
IV Produkt Envistar Compact Operation And Maintenance Download Page 23

Page 23

Operation and Maintenance 

Envistar Compact 

DSEC191101.01.EN

Continuous product development may give rise to specification changes without notice.

 

Filter replacement

1.  Shut down the unit via the service switch in the control equipment, safety 

switch in the 0 position.

NB:  

The safety switch is not designed for starting/stopping the unit. Always 

use the service switch in the control equipment to start and shut down 

the unit. 

2.  Wait until the fans have stopped, then open the inspection door.

WARNING! 

Positive pressure inside the unit, risk of personal injury. Allow 

the pressure to drop before you open the inspection doors. 

3.  Release the eccentric rails.
4.  Remove the old filter by pulling it towards you. 
5.  Clean the filter cabinets.
6.  Install the new filter, press in the eccentric rails to engage them and close 

the inspection door.

7.  Reset the FLC filter control function via the Climatix display, refer to sepa-

rate Climatix control documentation. (Only applicable to the Home Concept 

version of the unit with carbon filter and integrated control equipment (code 

MX).)

8.  Start the unit.

         Eccentric rails inside the unit

Summary of Contents for Envistar Compact








































Reviews:

No comments

Brands by name

Popular brands

Load more brands