6
Phoenix Ionizing Blower
5200632 Rev. E
5. OPERATION
Before energizing this equipment:
1. Ensure that the unit is properly grounded.
2. Ensure that all static control devices have been properly located, positioned and
installed.
After the above checks have been performed, simply turn the fan speed control knob
from the OFF position to the desired airflow setting. Use the highest airspeed that the
application allows. With the fan speed set to maximum, the Phoenix will neutralize static
charges at a distance of ten feet. As the fan speed is decreased, neutralization range will
also decrease.
NOTE
– Do not allow dust, dirt or debris to block or obstruct the airflow inlets
or outlets.
CAUTION – Electrical Shock Hazard
Always disconnect power supply before cleaning static neutralizing equipment.
Avoid touching static neutralizing points when power supply is energized.
