ManagerIQEasy_UM_9752103002_GB_V3_1
97
6.22 Setting up an FTP connection (Expert user)
Using an FTP connection, it is possible to copy log files stored on the Manager IQ Easy to a
local PC or laptop. The Manager IQ Easy must be included in a network for this and be assigned
an IP address by the DHCP server of the network. First connect the Manager IQ Easy to your
network before you switch on the Manager IQ Easy.
6.22.1 Standard FTP login username and password.
Default FTP login username and password:
For general use, a ‘default’ username and password are available.
User name: Simco
Password: 1234
6.22.2 Users FTP login username and password.
For better security, however, it is advisable to use your own username and password. To do so,
the following settings must be entered in the HMI: “
Remote FTP username
” and “
Remote FTP
password
”. The setting of parameters and settings is described in Section 6.12. Note that you
must be logged in as an Expert user to be able to change these settings.
Furthermore, it is useful to write down the parameter “
Ethernet IP Address
”, since it is required
for setting up a connection to the FTP server (see Section 6.17.11).
In the following examples, the IQ Easy system will have the IP address 192.168.51.163.
This address is entered in the examples.
6.22.3 Setting up an FTP connection with Edge.
Microsoft Edge does not support access to FTP servers. Use a different FTP client.
6.22.3 Setting up an FTP connection with IExplore.
Open IExplore on the PC or laptop
.
Enter the text “
ftp://
” in the URL bar, supplemented with the FTP address as it is also shown
in the HMI under the parameter “
Ethernet IP Address
” (e.g. “
”). Press on
the “
Enter
” key.
