1
IQ Power HL Sensor
5201252 Rev. A
1. SAFETY WARNINGS
Simco-Ion recommends that these instructions be read completely before installation or
operation is attempted. Failure to do so could result in personal injury and/or damage to
the equipment.
NOTE
– Statements identified with NOTE indicate precautions necessary to
avoid potential equipment failure.
CAUTION
– Statements identified with CAUTION indicate potential safety
hazards.
ATTENTION
– Les déclarations identifiées avec ATTENTION indiquent des
dangers potentiels pour la sécurité.
WARNING
– Statements identified with WARNING indicate potential serious
injury hazards.
AVERTISSEMENT
– Les déclarations identifiées avec AVERTISSEMENT
indiquent un risque de blessures graves.
NOTE
– This equipment must be correctly installed and properly maintained.
Adhere to the following notes for safe installation and operation:
1. Read instruction manual before installing or operating equipment.
2. Only qualified service personnel are to perform installation and repairs.
3. All equipment must be properly grounded, including machine frame to which the
equipment is mounted.
4. Disconnect input power before connecting or disconnecting any equipment.
NOTE
–
SENSITIVE ELECTRONICS
: Risk of equipment damage.
• Do not electrically discharge to sensor assembly.
• Sensor must be connected to power supply in presence of charged materials.
NOTE
–
SENSITIVE ELECTRONICS
: Risk of equipment damage.
• Avoid sharp blows to sensor assembly.
• Dropping sensor may cause damage to sensors.
CAUTION
– Installation must be in accordance with the National Electric Code
(NEC) or applicable government, state, providence or local regulations
ATTENTION
– L’installation doit être en conformité avec le Code national
de l’électricité ( NEC ) ou le gouvernement applicable , l’état , la province ou
suivant les réglementations locales.