4
5100577 Rev L
CONVEYOSTAT IN-LINE IONIZER
4. INSTALLATION
1. Locate the Conveyostat In-line Ionizer as close as possible to the inlet of
receiver vessels (such as dropout boxes, cyclones, fabric filters, etc.). In
these chambers, the speed of particles is lower, and the detrimental effects
of static electricity can be easily observed as clogs and material sticking.
2. The Conveyostat must be installed in the line with the flow direction of
the material being from the cable end side of the static bars thru to the
dead-end side of the static bars.
3. See power supply manual for maximum loading characteristics.
Figure 1. Conveyostat with BPS-C Power Supply
