Operation Manual - Hobart 2400 Compact – 120 / 140 / 180 kVA
Set-up Lock / Output Mode / Compensation
Document no. 578.430AB
Page 58 of 75
Go into the Setup Menu and then scroll up or down to the Modbus Slave Address submenu. Press the
center
●
button to enter the submenu and then press the
●
button again to allow the value to be changed.
Press the up or down arrow buttons to change the selection. Press the center
●
button to record the new
value. Press the LEFT arrow button to exit the submenu and return to the submenu list.
7.22 LED Brightness
The unit status LED’s have three brightness levels. The default is set to medium.
Go into the Setup Menu and then scroll up or down to the LED Brightness submenu. Press the center
●
button to enter the submenu and then press the
●
button again to allow the value to be changed. Press
the up or down arrow buttons to change the selection. Press the center
●
button to record the new value.
Press the LEFT arrow button to exit the submenu and return to the submenu list.
7.23 Unit of Measure
This submenu is used to set the unit of measurements to Metric or Imperial.
Go into the Setup Menu and then scroll up or down to the Unit of Measure submenu. Press the center
●
button to enter the submenu and then press the
●
button again to allow the value to be changed. Press
the up or down arrow buttons to change the selection. Press the center
●
button to record the new value.
Press the LEFT arrow button to exit the submenu and return to the submenu list.
7.24 Costumer ID
This submenu allows the user to assign a name to the unit for reporting purposes when Fault or Power
Log files are saved to a USB stick or drive.
Go into the Setup Menu and then scroll up or down to the Costumer ID submenu. Press the center
●
button to enter the submenu and then press the
●
button again to allow the value to be changed. Press
the up or down arrow buttons to change the selection. Press the center
●
button to record the new value.
Press the LEFT arrow button to exit the submenu and return to the submenu list.
7.25 Battery Replaced
This submenu allows the user to update/reset internal counter for battery replacement warning.
Go into the Setup Menu and then scroll up or down to the Battery Replaced submenu. Press the center
●
button to enter the submenu and then press the
●
button again to allow the value to be changed. Press
the up or down arrow buttons to change the selection. Press the center
●
button to record the new value.
Press the LEFT arrow button to exit the submenu and return to the submenu list.
7.26 Language
This submenu is used to change the language that all of the display screens, messages, alarms and
reports are displayed in. The unit comes with English, German, French, Russian, Danish, Spanish,
OM2252
Rev 0 December 15 2016
