background image

 

3

 

Warning 

This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farmhouses and 

by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non-retail applications. 

The installation of this equipment should be done by the Service Department. 
The socket should always be placed on an accessible location. 
When positioning the appliance, ensure the supply cord is not trapped or damaged. 
Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance. 
Always disconnect the power supply from the machine before any cleaning or maintenance service. 
Any change needed on the electrical installation for the appropriate connection of the machine, should be exclusively performed by qualified and certified professional 

personnel only. 

Any use by the ice maker not intended to produce ice, using potable water, is considered inappropriate. 
It is extremely dangerous to modify or intend to modify this machine and will void warranty. 
The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they 

have been given supervision or instruction. 

Children being supervised not to play with the appliance. 
Connect to potable water supply only. 

To see “Installation” chapter (

5). 

This machine is not intended to be used outdoors nor exposed to the rain. 
The machine should be connected using the power cord supplied with the equipment. 

It is mandatory to ground the equipment to avoid possible electric shock on individuals or damages to the equipment. The machine should be grounded pursuant local 

and/or national regulations. The manufacturer shall be held harmless in case of damages arising due to the lack of the ground installation. 

To see “Installation” chapter 

(7). 

In order to assure the proper operation and efficiency of this equipment, it is extremely important to follow the recommendations of the manufacturer, especially those 

related to cleaning and maintenance operations, which should be performed by qualified personnel only. 

CAUTION: The intervention of non-qualified personnel, besides of being dangerous, could result in serious malfunctioning. In case of damages, contact your distributor. 

We recommend always using original spare parts. 

ITV reserves the right to make changes in specifications and design without prior notice. 

For compression-type 

appliances that use flammable refrigerants

 should additionally consider the substance of the warnings listed below: 

 

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. 

 

Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. 

 

Do not damage the refrigerant circuit. 

 

Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. 

 

Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. 

In case of a flammable refrigerant leakage: 

 

Do not generate flames close to the appliance. 

 

Do not switch on/off or plug in/off the appliance. 

 

To ventilate immediately the area where appliance is located by opening doors and/or windows. 

 

To call to an authorized technical service. 

 

Reception of the Machine 

Inspect the outside packing. In case of damages, MAKE THE CORRESPONDING CLAIM TO THE CARRIER. 
To confirm the existence of damages, UNPACK THE MACHINE IN THE PRESENCE OF THE CARRIER and state any damage on the equipment on the reception document or 

freight document. 

Always state the machine number and model. This number is printed on three locations:  

(1)

 

Packing: On the outside, it contains a label with the manufacturing number. 

 

 

(2)

 

Exterior of the equipment: On the back of the equipment, there appears a label with the same characteristics as the previous one. 

Summary of Contents for SPIKA NG 130














Reviews: