10 Ordering Spare Parts
10.1 Ordering Spare Parts
10.1.1 Replacement parts procedure
To ensure against possible long and costly down time periods, especially on critical services, it is advisa-
ble to have spare parts on hand.
Repair orders will be handled with a minimum of delay if the following directions are followed:
1.
Give model number, size of pump, and serial number. These can be obtained from the nameplate
on the pump.
2.
Write plainly the name and part number of each part required. These names and numbers should
agree with those on the bill of material.
3.
Give the number of parts required.
4.
·Give complete shipping instructions.
10.1.2 Recommended spare parts
The following are pump application categories and their recommended spare parts.
Light Duty - Random mildly abrasive particles:
•
1 Shaft Sleeve
•
1 Gasket Set
Medium Duty - Light slurries up to 1.2 S.G. with moderately abrasive materials:
•
1 Impeller
•
1 Set Liners
•
1 Shaft Sleeve
•
1 Gasket Set
•
1 Set Bearings
Heavy Duty - Slurries over 1.2 S.G. with highly abrasive materials:
•
1 Casing
•
Impeller
•
Sets Liners
•
Bearing Assembly
•
Shaft Sleeves
•
Gasket Sets
Severe Duty - Key process equipment on heavy slurries over 1.2 S.G. with high heads and highly abra-
sive particles:
•
Casing
•
Impellers
•
2 Sets Liners
•
Shaft Sleeves
•
Gasket Sets
•
1 Spare Pump
Visit our website at
10 Ordering Spare Parts
36
Model VJC Installation, Operation, and Maintenance Manual
Summary of Contents for VJC
Page 1: ...Installation Operation and Maintenance Manual Model VJC ...
Page 2: ......
