a) Slightly spread the bottom apart.
b) Lift upwards.
1
2
3
Item Description
1.
Annular groove
2.
Coupling guard half
3.
Driver
5.
Remove the remaining nut, bolt, and washers from the pump half of the coupling guard.
It is not necessary to remove the end plate from the pump side of the bearing housing. You can
access the bearing-housing tap bolts without removing this end plate if maintenance of internal
pump parts is necessary.
6.
Remove the pump half of the coupling guard:
a) Slightly spread the bottom apart.
b) Lift upwards.
1
2
3
4
Item Description
1.
Coupling guard half
2.
Annular groove
3.
Pump end plate
4.
Driver
6.5.4 Remove the rotating element
1.
Disconnect the coupling.
6.5 Disassembly
62
Model 3410 Installation, Operation, and Maintenance Manual
