ITT 3610 i-FRAME, Manual, Page: 19 / 130

Nameplate types
Nameplate Description
Pump casing
Pump
Provides information about the hydraulic characteristics of the pump.
The formula for the pump size is: Discharge x Suction - Nominal Maximum Impeller Diameter in
inches.
(Example: 2x3-8)
Provides information about the lubrication system used.
ATEX If applicable, your pump unit might have an ATEX nameplate affixed to the pump, the base-
plate, or the discharge head. The nameplate provides information about the ATEX specifica-
tions of this pump.
Nameplate on the pump casing using English units
Figure 4: Nameplate on the pump casing using English units
Nameplate field Explanation
MODEL Pump model
SIZE Size of the pump
FLOW Rated pump flow, in gallons per minute
HEAD Rated pump head, in feet
RPM Rated pump speed, in revolutions per minute
HYDRO PRESS Hydrostatic pressure at 100°F, in pounds per square inch
MAX. DES. WORKING PRESS Maximum working pressure at temperature °F, in pounds per square inch
S/N Serial number of the pump
CONT./ITEM NO. Customer contract or item number
IMP. DIA. Rated impeller diameter, inches
MAX. DIA. Maximum impeller diameter, inches
STD. DIM. Standard ANSI dimensional code
MAT'L Material of construction
3.3 Nameplate information
3610 i-FRAME API 610 11th Ed/ISO 13709 2nd Ed, API Type BB1 Single-Stage, Axially-Split, Between-Bearing IOM 17