ITS Telecom PanCam-C, Installation And Programming Manual

Page: 5 / 34

PanCam/Pantel/Pancode Installation and Programming Manual 1
1 Introduction
ITS offers a wide range of Access Control Door Phones for
indoor and outdoor entry control. These solutions range from
the simplest one button unit to the most sophisticated unit with
a full keypad and built-in camera to monitor visitors at the
entrance. All of ITS’s Access Control Door Phones
incorporate cutting edge technology, providing a high quality
speakerphone and a built-in electric lock control. All ITS’s
Access Control Door Phones are easy to set-up, modern and
durable in design and provide “plug and play” installation.
This guide provides installation and programming instructions
for the following products:
•
PanCam unit
•
Pantel Outdoor unit
•
Pantel Indoor unit
•
Pancode Outdoor unit
•
Pancode Indoor unit
1.1 PanCam
The PanCam unit is available in two versions: PanCam-C
(with keypad) and PanCam-T (one button). Both are wall
mounted access control door phones, connected to an analog
port of a PBX or a Key Telephone System, with an internal
black & white or color high-quality pinhole camera encased
within the unit. Both, PanCam-C and T are vandal and weather
resistant, suitable for outdoor installation.
General Features
The PanCam controls the camera, providing three different
modes of operation:
•
Always on
•
Powered by pressing any button
•
Powered by pressing the call button
Calling the PanCam unit from any extension will activate its
camera, enabling the door supervisor to see who is in the direct
neighbourhood of the unit.
PanCam-C Features
The PanCam-C unit has the following features:
•
Direct dialing to any extension
•
Speed-dial to internal or external subscribers
•
Automatic Busy & Disconnect Cadence Detection
•
Door opening from any extension