BATTERIES
The
FS/GS
can be fitted with either
rechargeable
or
replaceable
batteries.
The
FS/GS
batteries are designed to last more than
a working shift.
However, if power does run low, a warning
BATTERY
LEVEL LOW
will be displayed. (After a further period
of use, your
FS/GS
will turn itself off and will not turn
on again.) You should do one of the following:
Return the
FS/GS
to your base or office.
Or
if rechargeable batteries are fitted, recharge
them (see
Charging batteries
) or fit a fully
charged battery stick (see
Replacing
batteries
).
Or
fit three new AA size Alkaline batteries (see
Replacing batteries
).
Charging batteries
Charging is recommended before each working shift.
You will need an
FS/GS AC Adaptor
.
CAUTION: DO NOT ATTEMPT TO RECHARGE
NON-RECHARGEABLE BATTERIES. Check that
rechargeable batteries are fitted to your FS/GS,
and are oriented correctly. Use only the FS/GS
AC Adaptor.
•
Turn off the
FS/GS
.
•
Plug the AC adaptor into the AC supply.
•
Connect the AC adaptor to RS232 connector.
•
Turn on the AC supply.
•
Leave the unit to recharge, preferably for 8
hours.
•
Turn off or disconnect from the AC supply.
