CLEANING
If the screen gets dirty or smeared, clean it with a
clean cloth. If the
FS/GS
gets very dirty, it should be
cleaned:
•
Turn off the
FS/GS
. Make sure that the battery
cap is tight. If you have dropped it, check that the
case and seals are intact.
•
Gently rinse the unit under clean running water
(no more than hand hot, 40
°
C). Do not immerse
the unit unnecessarily, or use a high pressure jet.
•
To remove stubborn deposits, use a soft bristle
brush and a mild detergent. TREAT THE
KEYBOARD GENTLY.
•
Blow any water out of the connectors, then leave
it to drain and air dry. DO NOT EXPOSE THE
UNIT TO TEMPERATURES ABOVE 55
°
C.
•
Polish the screen with a clean cloth.
CAUTION: Do not use organic solvents or harsh
detergents, as they may damage the casing.
PERIPHERALS
CAUTION: Connect only approved cables and
peripherals to your FS/GS.
To connect a suitable peripheral to the
FS/GS
:
•
Turn off the
FS/GS
(and peripheral, if
appropriate).
•
Fit the peripheral to the connector.
•
Use connector locking mechanisms where fitted.
•
Turn on the
FS/GS
(and peripheral, if
appropriate).
To disconnect a peripheral:
•
Turn off the
FS/GS
(and peripheral, if
appropriate).
•
Disconnect the peripheral from the connector.
