11.3. Thermostat Factory Settings
It may be necessary to reset the thermostat to restore
factory settings.
The thermostat settings erased by the reset are:
●
the temperature setting ;
●
the connection with the ventilation unit.
The following settings are stored in the heat pump and
remain active:
●
the TIME/DATE settings .;
●
the TAP WATER START setting.
Resetting your thermostat is done as follows:
a) Thermostat reset can only start within 2 minutes of
the batteries being fitted in the thermostat.
If necessary, refit the batteries!
b) Activate the thermostat within two minutes, press
the
LOGO
and hold it down (about 5 seconds) until the
VENTILATION, TEMPERATURE and HOUSE symbols
are displayed on the screen.
Flashing symbols/parts are not paired.
Continuously lit symbols/parts are connected.
c)
Press the lower-right corner of the screen (TAP
WATER COMFORT button) for about 5 seconds until
your thermostat restarts
ä
Caution!
The TAP WATER COMFORT button is not visible to
prevent accidental resetting.
d) The thermostat has been reset to factory settings.
e) Restore the lost settings and wireless connections.
44
Summary of Contents for WPU 5G 25 c
Page 1: ...A Itho Daalderop WPU 5G User manual...
Page 2: ...Translation of the original document...
Page 7: ...7...
Page 49: ...49...
