Itho Daalderop WPU 5G 25 c, User Manual

Page: 21 / 50

6. Hot water
6.1. Tap water comfort
Tap water comfort
You can set the tap water heating of the heat pump by
using TAP WATER COMFORT function.
Description
Eco
The supply of hot water is heated to about 58°C
once a day at a set time.
The supply of hot water is heated to about 62°C
once a week to ensure legionella prevention.
Comfort
Throughout the day, the supply of hot water is
heated to about 55°C when the temperature falls
below 45°C.
The supply of hot water is heated to about 58°C
once a day at a set time.
The supply of hot water is heated to about 62°C
once a week to ensure legionella prevention.
Boost
After switching on, the supply of hot water is
heated directly and once to about 62°C.
Stand-
by
Water heating is disabled.
The supply of hot water is heated to about 62°C
once a week to ensure legionella prevention.
Off
Water heating is disabled.
The Legionella prevention function is disabled.
View the current settings as follows:
a) Activate the thermostat.
b) Press the
TAP WATER COMFORT button .
c) The current setting is displayed on the screen.
Example tap water comfort setting.
d) The thermostat will automatically return to the
operating status once it is not used for 10 seconds.
6.2. Setting tap water comfort
The tap water comfort is adjusted as follows:
a) Activate the thermostat.
b) Press the
TAP WATER COMFORT button for
approximately 3 seconds until the current setting is
flashing on the display.
c) By pressing the TAP WATER COMFORT button several
times, the various settings will appear.
Eco
Comfort
Boost
Stand-by
Off
d) Select the correct setting.
e) Confirm the choice by pressing the
LOGO . The
selected setting is displayed for 3 seconds.
If the choice is not confirmed within ten seconds, then the
change will be cancelled and the thermostat will return to
operating status.
f) The thermostat will then automatically return to the
operating status.
21