Itho Daalderop WPU 5G 25 c, User Manual

Page: 26 / 50

7.1.2. Unpairing VENTILATION UNIT from
THERMOSTAT
The thermostat and the ventilation unit are unpaired as
follows:
a) Set the ventilation unit to pairing mode as described
in the ventilation unit manual.
Make sure that an unpairing signal is sent by the
thermostat within 2 minutes. If the unpairing fails, the
procedure must be restarted.
b) The thermostat unpairing procedure can only be
started within 2 minutes of the batteries being placed
in the thermostat.
If necessary, replace the batteries!
c) Activate the thermostat within two minutes, press
the
LOGO and hold it down (about 5 seconds) until the
VENTILATION, TEMPERATURE and HOUSE symbols
are displayed on the screen.
Flashing symbols/parts can be paired.
Continuously lit symbols/parts can be unpaired.
To stop the unpairing procedure, press the LOGO . If no
choice is made, the thermostat will return to operating
status after 1 minute.
d) Press the VENTILATION symbol .
The remaining symbols disappear.
e) Confirm the choice by pressing the LOGO .
f) After unpairing, the thermostat will automatically
return to the operating status.
g) The thermostat is no longer paired with the
ventilation unit. The settings of the ventilation unit
are no longer visible on the screen.
26