4. Time/date
4.1. Request time/date
Time/Date
●
When the heat pump is connected to monitoring, the
current time and date are automatically set by the
thermostat.
●
When the heat pump is not connected to monitoring,
then the current time and date must be set via the
thermostat.
Note
If the current time is not automatically adjusted at the
start of summer or winter time, you will need to
manually adjust the correct time.
View the current time and date as follows:
a) Activate the thermostat.
b) Press the
TIME/DATE
button.
When the
TIME/DATE
button flashes, then the current time
and date is not yet set.
c)
The time is displayed on the screen.
Example time (14:36).
d) By again pressing the
TIME/DATE
button, the date is
displayed.
Example date (27-11).
e) By again pressing the
TIME/DATE
button, the year is
displayed.
Example year (2018).
f)
The thermostat will automatically return to the
operating status once it is not used for 10 seconds.
16
Summary of Contents for WPU 5G 25 c
Page 1: ...A Itho Daalderop WPU 5G User manual...
Page 2: ...Translation of the original document...
Page 7: ...7...
Page 49: ...49...
