Ithaca PcOS series 90plus Programmer'S Manual Download | Manualshive

Page: 3 / 180

background image

Programmer's Guide

PcOS Series 90PLUS

Change History

12/16/99

Rev M

Page i

Change History

Rev. M
Updated bookmarks in the Code Summary Table
Added Section 3.6.2.2 and Table 4
Updated MICR section
Added Euro Character on page 33
Corrected Cash Drawer Command on page 72
Updated “Service Information” section
Updated “Contacting Ithaca Peripherals” section

Rev. L
Clarified cash drawer connectors on page 144
Changed IEEE-1284 to IEEE 1284 and Code 3 of 9 to Code 39

Rev. K
Reformatted entire document
Corrected miscellaneous grammar and spelling mistakes

Rev. J

Update for Firmware Rev. 2.24

Corrected Epson documentation
Added documentation for justified bar codes and readable printing of bar codes
Added documentation for Bar code 93

Rev. I

Update for Firmware Rev. 2.21

Corrected documentation for ENQ 15, 17, and 20 commands; length was 40H changed to 40 decimal
Added [ESC] z (&%FR) from release commands
Added features to graphic-save
Added OCR overlay features
Corrected miscellaneous grammar and spelling mistakes

Rev. H

Update for Firmware Rev. 2.15

Improved description of pass-through and multidrop
Added features to [ESC]a command
Added 90PLUS
Removed references to Ithaca Peripherals
Corrected description of Mechanical Test Mode
Updated several graphic examples

Rev. G

Update for Firmware Rev. 2.13

Added narrow, 2.4 inch print zone
Added [ESC]mP, [ESC]q<n>, and [ENQ]<17> commands
Changed documentation on [ENQ] commands to reflect that they are no longer buffered
Documented Epson cash drawer option
Fixed right margin specifications

Rev. F

Update for Firmware Rev. 2.11

Added functionality to the RESET commands
Enabled [DLE][ENQ] <3> EPOS
Added M50 extension commands
Added 270

°

rotated font and 5 x 7 fonts to [ESC]P commands

Changed IPCL command &%CC to accept 3 decimal digits, was 2 decimal digits
Corrected the description of the [ESC]J command. It does not start the next line at the left margin unless Auto-CR is on.
Updated the configuration table
Changed RS1284 references to IEEE-1284
Added Welsh and Thai character sets
Updated the cut command. The cutter does not have selectable cut. The cut command is now only 2 bytes.
Updated MICR section to include translation tables and field checking
Added 5 x 7 font to rotated print functions
Added sections on Windows Plug and Play
Added [ENQ]<20> (return all status) and [ENQ]<21> (return printer ID) commands

«
1
2
3
4
5
...
»

Summary of Contents for PcOS series 90plus





















































































































































































Reviews:

No comments

Related manuals for PcOS series 90plus

Power Defense PD3

Brand: Eaton Pages: 4

Brand: Felix Storch Pages: 41

Brand: oliser Pages: 6

VarioPrint 1055

Brand: OcÃ© Pages: 194

Brand: Oce Pages: 12

Brand: DNP Pages: 2

Brand: TierTime Pages: 28

Brand: BIO RAD Pages: 61

WorkCentre PRO 35

Brand: Xerox Pages: 13

Brand: Felix printers Pages: 26

Brand: Muratec Pages: 6

Brand: Aficio Pages: 188

Brand: EFI Pages: 168

Brand: AstroJet Pages: 32

Brand: Pantum Pages: 111

Brand: Konica Minolta Pages: 12

Brand: Ocom Pages: 23

Brand: Oce Pages: 227

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands