2
Symbols, safety
Important, safety information, recommendation
Maintenance
Contents
General safety information
The details and information in the installation guide are provided for the purposes of
describing the product and its assembly only. The information does not discharge
the user from the obligation to carry out his own assessments and checks. It is
important to bear in mind that our products are subject to a natural process of wear
and ageing. These notes contain important information that will enable you to use
the product safely and appropriately. When sold, rented out or otherwise passed on
to another party, this product must be handed over with the installation guide.
When installing, operating and maintaining Linear Unit KRF 8 80x40 ZR, it is
important to ensure that all moving elements are secured so that they cannot
be switched on and moved unintentionally. Rotating and moving parts can
cause serious injury! You must therefore read and follow the safety instructions
set out below.
All work on and with Linear Unit KRF 8 80x40 ZR must be performed with
“safety first” in mind.
Always switch off the drive assembly before you start working on Linear Unit
KRF 8 80x40 ZR
Ensure the drive unit cannot be switched on unintentionally, e.g. by affixing warn-
ing notices at the activation point or by removing the fuse from the power supply.
Do not place your hand within the operating range of moving parts in Linear
Unit KRF 8 80x40 ZR when the unit is still switched on.
Fit guards and covers so that the moving parts of Linear Unit KRF 8 80x40 ZR
cannot be touched unintentionally.
Observe the regulations pertaining to accident prevention and environmental
protection that apply in the country and place of work where the product is
being used.
Use only item products that are in perfect working order.
Failure to use original spare parts will invalidate the product warranty!
Check the product for obvious defects.
Use the product only within the performance range described in the technical
data.
Ensure that all the safety equipment associated with the product is present,
properly installed and in full working order.
Do not alter the position of safety equipment, circumvent it or render it
ineffective.
Accessories
9
Correct use
3
General safety information
2
Improper use
3
Installation
5
Maintenance
11
Operating parameters
4
Symbols, safety
2
