Advanced Settings
31
6.Miscellaneous
Volume Setup
Make the detailed volume setting of the unit.
Setting Item
Default Value
Setting Details
Maximum Volume
Off
Set the maximum value to avoid too high volume.
Select a value from "Off", "30" to "79".
Power On Volume
Last
Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level
before entering standby mode), "Min", "1" to "79"
and "Max".
•
You cannot set a higher value than that of
"Maximum Volume".
Headphone Level
0 dB
Adjust the volume level difference between
speakers and headphones. Select a value
between "-12 dB" to "+12 dB".
OSD Setup
Make the setting of on-screen display function that can display the setting menu screen,
volume operation screen and the like on the TV.
Setting Item
Default Value
Setting Details
On Screen Display
On
Set whether or not to display the operation
screen on the TV.
"On": The operation screen will be displayed on
the TV.
"Off": The operation screen will not be displayed
on the TV.
•
The operation screen may not be displayed
depending on the input signal even if "On"
is selected. If the operation screen is not
displayed, change the resolution of the
connected device.
Language
English
Select the on-screen display language.
Screen Saver
3min
Set the time to start the screen saver. Select a
value from "3min", "5min", "10min" and "Off".
12V Trigger A Setup
You can enable power link operation when you connect the unit and the external devices
equipped with 12V trigger input jack. When the desired input is selected, power link
operation will be activated with a control signal of maximum 12 V/150 mA output from the
12V trigger output jack.
Setting Item
Default Value
Setting Details
Delay
0 sec
Set after how many seconds the 12V trigger
output will occur in response to the unit's
operation. As some devices cause a large
current when they turn on, delay the output if
such devices are connected. Select a value
between "0 sec" to "3 sec".
BD/DVD
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
CBL/SAT
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
