14
USING YOUR AU4i
\
WARNING!
If your iTechworld AU4i Inverter Generator is not connected to your
caravan and is being used as a standalone unit, ensure it is grounded when using
sensitive equipment such as laptops.
When the inverter generator is used as a backup power supply to a building, it
should be connected by a qualified electrician and must comply with relevant laws
and electrical codes. Failure to do so my cause feedback to the power line and may
cause injury to utility workers or other persons. Failure to do so may also cause the
iTechworld AU4i Inverter Generator to explode, burn, cause a fire or cause injury.
CAUTION! DO NOT
overload your iTechworld AU4i Inverter Generator repeatedly,
doing so may cause damage to the inverter board.
DO NOT
exceed the rated current on either 240v 15amp socket.
The iTechworld AU4i Inverter Generator
CANNOT
be joined in parallel to any other
generator or power device.
DO NOT
lengthen the exhaust pipe.
If using an extension cable, ensure you use a rubber sleeve, flexible cable (must meet
IEC245 requirements).
Extension cable limitations: 2mm at 60m length/ 3mm at 100m length.
Ensure your ITechworld AU4i Inverter Generator is away from other wires and cables
such as distribution networks.
NOTE!
When using the AC output, the DC output can be used. If you are using both,
ensure the total power output does not exceed the generators rated power output.
