22
2.
Using the screwdriver provided, loosen the 2 screws on the spark
arrester.
3.
Remove the spark arrester as shown above.
4.
Check the spark arrester, if necessary, clean or replace.
5.
Refit the spark arrester, using the screwdriver provided tighten the 2
screws on the spark arrester.
6.
Refit the outlet cover plate, using the screwdriver provided tighten
the 4 screws.
TRANSPORTING YOUR AU4i
Before storing you iTechworld AU4i Inverter Generator for long periods:
•
Ensure the storage area is dry and clean.
•
Ensure you have drained the fuel.
1.
Drain all petrol into an approved fuel container. Open the fuel tap and
start the engine. Run until engine shuts down.
2.
Drain all oil.
WARNING!
When transporting you iTechworld AU4i Inverter Generator:
DO NOT
overfill the petrol tank.
Ensure the fuel tap is in the
‘off’
position.
Ensure it is secured to prevent tipping over.
DO NOT
operate whilst still on or in your vehicle. Remove from vehicle before use.
Use in a well-ventilated area.
Avoid storing in direct sunlight.
DO NOT
store in sealed area or at high temperatures. Doing so may lead to fuel
becoming volatile and may cause an explosion.
Avoid rough roads. If transporting on rough roads is necessary, drain the generator
before use.
