ITC WTRTEC RED, Manual

Page: 12 / 20

12
Configuration
Reset:
enables automatic alarm reset when the reading is back within the permissible values.
Stop:
enables the dosing control outputs to be shut down.
4.7 Configuration and monitor
CONFIG
SET UP
COMUNICA TIONS
CHECK / MONITOR
pH
SP
07.00
CAL
CONTROL
ALARM
REGISTER
PH REGISTER
Out: 4-20 mA 2
4 mA: 00.00
20 mA: 14.00
ENT
m3h
0.20 %
SP
CAL
CONTROL
ALARM
ALARM DETECTOR
REGISTER
Q REGISTER
Out: 4-20 mA 2
4 mA: 00.00
20 mA: 14.00
ENT
4.6 Configuration of the register outputs
If any of the 4-20 mA analogue control outputs is unused, these can be used to be configured as outputs
for logging any sensor readings.
To do this, the output to be used needs to be selected and the 4 mA value related to the minimum sensor
reading, and the 20 mA value with the maximum reading.
4.7.1 Initial configuration (SET UP)
CONFIG
SET UP
COMUNICA TIONS
CHECK / MONITOR
ENT
pH 7.60 SP 7.00
Out 1 021%
Out 2 070%
m3h 10. 5
CONFIG 21.3ºC
CONFIG. SET U P
UNITS
PH CONTROL
TEMP. READING
LCD AU TO
ENT
Q ALARM DET
Stop: None
Q = 0 200 s
m3h
0.20 %
SP
CAL
CONTROL
ALARM
ALARM DETECTOR
REGISTER
o Reset: N