Archimede 5000 series- FM Power Amplifiers
User’s manual – Page 42 of 65
Power Size
: power size according to the rated value of each model (
Show timers
: time in normal operation, alarm or stand-by mode (
Set power saver
: power saver time settings (
For information about
Confirm Changes
and
Ignore Changes
commands
11.1.a
Function
menu
This menu allows to set the equipment as MASTER (standalone single equipment) or SLAVE (working within a broadcasting
system). If the equipment is set as SLAVE, it will stay in stand-by mode until a proper signal will come from the
REMOTE
connector
To set the equipment in MASTER or SLAVE mode.
1)
In the program page, ensure that the cursor
>
is on the left of
Function
(if not, turn the knob in order to move the cursor
>
this way).
2)
Press the knob repeatedly till reading MASTER or SLAVE according to your needs.
3)
Should you have other settings to do in the
Program Page
, directly skip to one of the following paragraphs. If not, go on
with the next step.
4)
To confirm the entered setting, select
Confirm Changes
and press the knob (or, to quit the menu without changing the
previous setting, select
Ignore Changes
and press the knob).
Step 3 -
note that you are still inside the program page, so no operations are necessary to come back to it, but you haven’t still
stored the entered setting, so performing step 4 is mandatory.
If the equipment is used within a broadcasting system (set to
SLAVE
) and the other amplifier develops a fault, the working
equipment can be used alone by setting it as
MASTER
.
11.1.b
Power size
menu
This menu allows setting the power size according to the rated value of each model:
1)
In the program page, ensure that the cursor
>
is on the left of
Power Size
(if not, turn the knob in order to move the
cursor
>
this way).
2)
Press the knob repeatedly till reading the proper power size (e.g.:5000W for Archimede 5000).
3)
Should you have other settings to do in the program page, directly skip to one of the following paragraphs. If not, go on with
the next step (see note at the bottom).
4)
To confirm the entered setting, select
Confirm Changes
and press the knob (or, to quit the menu without changing the
previous setting, select
Ignore Changes
and press the knob).
Step 3 -
note that you are still inside the program page, so no operations are necessary to come back to it, but you haven’t still
stored the entered setting.
Thanks to the
Power size
menu, it is possible to use the same control board as an
“universal” spare part for all the
Archimede models.
Summary of Contents for ARCHIMEDE 5000 Series
Page 65: ...User s manual Page 65 of 65 ...
