Archimede 5000 series- FM Power Amplifiers
User’s manual – Page 39 of 65
10.5.c
Encoder Test
menu
This menu allows to check the correct operation of the digital encoder connected to the knob.
1)
From the
Debug Page
(
10.5), select
Encoder Test
:
2)
Press the knob. The
Encoder Test
menu will be shown:
3)
Turn the knob and check if the
A
and
B
values are changing. As an example, the following image was taken after having
turned a bit the knob starting from the previous image:
4)
To quit and go back to the
Debug Page
, press the knob.
10.6
Language
menu
Refer to par. 8.1.c in which this menu is already explained.
After setting the language, you are still inside the main menu, so no operation are necessary to come back to it. Instead, you might
decide to come back to the working page by turning the knob clockwise in order to move the cursor
>
upward to the left of
Working
Page
(the first option), then press the knob to come back to the working page.
10.7
Set Function, Size
menu
It’s a special password-protected technical menu. For detailed information, see the dedicated Chapter 11.
10.8
Set LCD Contrast
menu
1)
From the main menu (
10.3), select the
LCD Contrast
option:
2)
Press the knob. The
LCD Contrast
menu will show the current level of the LCD contrast (in this example 140):
3)
Ensure that the cursor is placed to the left of
LCD Contrast
as in the previous image (otherwise turn the knob to move it),
then press the knob. The cursor will move on the right of
LCD Contrast
:
Summary of Contents for ARCHIMEDE 5000 Series
Page 65: ...User s manual Page 65 of 65 ...
