19
CUSTOMER SERVICE
LOG SET AND PEBBLES
Use only embers, ceramic logs and river
rock that comes with the kit, do not add the
other and respect the arrangement indicated by
the manufacturer.
Always use original parts or parts supplied
by the manufacturer, the installation must
be carried out by personnel authorized by the
manufacturer or a qualified technician.
installation
- Distribute the coals, taking care not to penetrate
into the rider protection to avoid damaging the pilot
or thermocouple;
- Place the logs or stones in the order shown in the
operating position of wood and stones;
Do not change the arrangement of the wood
and embers in the fireplace from that inten-
ded by the manufacturer.
The handling and placement of logs and
embers in the hearth, must be done with work
clothing with long sleeves and long pants, using:
- Protective mask to avoid inhaling particles of
ceramic fiber.
- Work gloves to avoid contact with bare hands.
- Working-glasses with side shields to prevent
any particles of ceramic fiber in the eye.
Gently and carefully position the coals, and
all logs are very fragile components.
If you find one or more sockets broken or chip-
ped, but not installing them to replace them
immediately.
To clean the wood and coals, never use a
vacuum cleaner to avoid damage and displa-
cement from the position indicated by the manu-
facturer on the device.
- Turn on the device to test the "behavior" and
appearance of the flame.
Do not dispose of waste (paper, cigarette
butts, plastic and inflammable material)
depending on the unit to avoid possible damage
creating a hazardous situation.
