Italjet Dragster 2022, Maintenance Manual

Page: 47 / 165

Front brake control
Handle (1) is located on the right side of the
handlebar. When braking, the brake switch will cause
the tail lamp to light up. To activate the brake pull the
control lever towards the accelerator handle.
Loosen the two fixing screws (2) to adjust the
position of controls on the handlebar.
Warning
Don't forget to tighten the screws
（
2
）
after
adjustment.
Rear brake control
The brake handle (1) is located on the left side of the
handlebar. When braking, the brake switch will cause the
tail lamp to light up.
To start the brake, turn the brake handle towards the left
handlebar.
Loosen the two fixing screws (2) to adjust the position of
the controller on the handlebar.
Warning
Don't forget to tighten the screws
（
2
）
after
adjustment.
47