![Italjet Dragster 2022 Maintenance Manual Download Page 40](http://html1.mh-extra.com/html/italjet/dragster-2022/dragster-2022_maintenance-manual_2094790040.webp)
Warning
Do not use the motorcycle for lack of oil pressure,
which may cause engine failure
High beam lamp“
”
When the high beam lamp is turned on by use of the
appropriate control located on the left handle switch
assembly, the lamp is lit.
Coolant high temperature alarm lamp
“
”
When the coolant temperature reaches its maximum
limit, the lamp will be lit.
Warning
Stop driving the motorcycle and turn off the engine.
Do not use the motorcycle when the coolant
temperature is too high. It may cause engine failure.
- Wait for the cooling liquid to cool, then check the liquid
level as described in the relevant paragraph (5.1.d) or
contact your trustworthy dealer to check the fault.
Low fuel supply alarm lamp
“
”
Turn on the ignition key; the lamp will be lit for a few
seconds, and then go off. If the lamp is lit when the
motorcycle is used, it indicates that the fuel level has
reached the reserve level (about 2 liters), indicating that
the driving range is limited. Please refuel as soon as
possible.
ABS alarm lamp“
”
When you turn the ignition key, the ABS control unit
will diagnose itself and the ABS lamp will be on until the
motorcycle runs normally.
On the other hand, if the motorcycle is running at a
speed higher than 5 km/h, the lamp continues to light up,
indicating that the ABS braking system is faulty;
- Stop and turn off the engine;
- Please wait a few minutes and then reignite. If the
ABS lamp lights up again, contact the nearest
Jincheng
dealer to check the ABS system.
EFI fault system indicator lamp
“
”
Turn on the ignition switch. The EFI fault system
indicator lamp remains on after self-checking. When the
engine is working, the indicator lamp is off. If the EFI
fault indicator lamp remains on when the engine is
working, it indicates that the EFI system is faulty. Stop
and turn off the engine.
- Please wait a few minutes and then reignite. If the EFI
fault system indicator lamp is still on, contact the
nearest
Jincheng
dealer for a self-diagnostic system
check.
40
Summary of Contents for Dragster 2022
