Stargel 4
- 9 -
Stargel 4 - 2018/03 - Rev. 00
EN
1.
RECEIPT, HANDLING, OPENING OF THE
PACKAGING
1.1 RECEIPT
- Before opening the packaging, check that it does not feature breakages caused by impacts during
transport.
- In case of damage to packaging for which you may assume damages to the content, contact the
insurance company immediately, leaving everything as you found it.
1.1.1 Packed machine lifting
Packaging lifting must be performed inserting
lifter forks completely in the area between pallet
feet, distributing machine weight so that packaging
barycenter is balanced.
1.1.2 Prohibited lifting means
Lifting means or systems not meeting safety
requirements shall not be used. Such characteristics
are:
- The lifting capacity is inferior to the machine
weight or lifter design characteristics are not
adequate (e.g.: short forks).
- Non-conforming or worn ropes or cables.
1.2 PACKAGING OPENING
Use suitable tools to open the
wooden protection packaging.
1-
Remove nails starting from above until the machine is
uncovered but still fixed to the pallet (packaging platform).
2-
Remove protective canvas in which the machine is wrapped.
3-
Visually check that the machine was not damaged during
transport.
Cardboard packaging
is closed externally by steel bands.
1-
Hold an extremity of the external bands with your hands and
cut them using shears.
2-
Remove the cardboard by pulling it upwards.
3-
Remove polystyrene and the polypropylene sack protecting
the machine.
4-
Cut the bands that lock the machine.
WARNING
Protect your hands with gloves since there is a
risk of getting hurt by wood splinters while cutting
the bands if they are not held firmly during this
operation.
NO!
NO!
NO!
Fig. 1
Fig. 2
Fig. 3
